(as of Oct 24,2021 07:07:06 UTC – Details)
What Are the Platforms of GPU Miner Rigs for PrawnHz PCIe Riser?
Wide Compatible with Bitcoin, Ethereum, Tether, XRP, Bitcoin, Cash, Chainlink, Tezos, Polkadot, Litecoin, Bitcoin SV, Binance Coin, EOS Stellar, ETC.
What is PCIe? You can call PCI-Express, it is the abbreviation of Peripheral Component Interconnect Express.
What is PCIe Riser?
PCI riser is a new generation of bus interface, which refers to the function expansion card or transfer card inserted in PCI-E interface.
It uses the current industry popular point-to-point serial connection. Compared with the shared parallel architecture of PCI and early computer bus, each device has its own dedicated connection. It doesn’t need to request bandwidth from the whole bus, and it can transfer data rate to a high frequency and reach the high bandwidth that PCI can’t provide.
PCI Express riser is also called as GPU riser or PCIE extension cable. It converts PCI Express X1 slot from the mother board to external PCI Express X16 slot. The extended PCIE X16 slot is mainly used on BTC, ETH GPU Mining rigs.
PrawnHz PCIE risers include the 6-Pin power cable and USB 3.0 PCIE signal communication cable. The SATA to 6-pin power cable will help easy to get power for GPUs. The USB 3.0 extension cable will provide more flexibility to the placement of risers and GPUs to mount on mining rigs.
PrawnHz PCIe Risers Compatible with NVIDIA and AMD GPU for Mining, Together with All Kinds of Miner Boards, Basing on Multiple Platforms
1. Compatible with NVIDIA and AMD GPU for mining, including
Nvidia RTX 3080, NVIDIA RTX 3070, RTX 3060Ti/RTX 3060, Nvidia RTX 1660 6GB Ti
AMD RX 6800 and 6800 XT, AMD Radeon VII, AMD RX 5700 and 5700 XT, AMD RX 5600 XT
2. Compatible with all brands miner boards: ASUS, ASROCK, GIGABYTE, BIOSTAR, MSI, EVGA, INTEL SUPERMICRO, FOXCONN, LENOVO, TOSHIBA, HP, DELL. Typically compatible with below motherboard for Cryptocurrency Mining(BTC), and compatible with below SSD.
ASUS Prime Z390-P LGA1151 + Kingston 120GB A400 SATA 3 2.5″ Internal SSD SA400S37/120G
3. PCIE signal need 3.3V voltage for GPUs and other IO device. The PCIE riser adapter will pick up 12V power from a power supply by packed 6PIN to SATA power cable. Two step voltage conversion is to extend pcie riser working life.
Firstly, the on-board voltage coversion chip will pick up 12V power from PSU and convert to 5V.
Secondly, then we designed the voltage control circuit,adjust the 5V voltage to 3.3V and get the 3.3V target voltage. In this way the PCIE riser will consume little power.
Buck and Voltage Stabilizing Circuit，Safer and More Stable
Red LED lamp real-time monitoring the Operation Status of riser
The locking clasp makes the installation of the graphics card more firm and the disassembly and assembly more convenient
The PCIE X1 adapter is compatible with all PCIE card slots on the motherboard
The dual-head USB interface makes the data transmission more efficient and the routing more convenient
Consider this SATA cable If your GPU without separated PSU.
Updated Version of the Old VER 006C Risers – After being tested with a number of Nvidia RTX 30 series and other cards, PrawnHz PCIE risers 009S performed flawlessly, running 24/7 without any problems.
Reliable Risers with LED PCI-E Adapters – PrawnHz 009S provides a safer and more reliable connectivity, with 2 LED indicators on x16 PCIe board, and 1 LED indicator on X1 PCIe small board, to indicate the riser active when the LED lights are red.
More stable and safer PCIe risers – PrawnHz PCIE Riser 009S, including four striking filter capacitors, together with a DC-DC Converter IC, a 100 or 150 μH inductor, plus a MOSFET, constitute a buck and voltage stabilizing circuit, which converts 12V DC input to 3.3V DC output to achieve a more stable working voltage for the graphics card for your Bitcoin Mining.
Extensive Compatibility – PrawnHz PCIe Riser card is compatible with X16 to X1 PCI-e slot of the motherboards, ethereum miner rig, monero mining rig, dedicated for alt coin mining, PCIe Riser mining, other crypto mining frame, case, and air rig complete.
Package Included – Within an anti-static bag, contains 6 sets PCIe Risers, of which every set includes 1 pc PrawnHz PCIe Riser x16 PCBA, 1 pc PCIE x1 adapter board, 1 pc 23.6 inch USB cable, 1 pc 6-pin PCI-E power to 15-pin SATA power cable.