MLLIQUEA 8 GPU Mining Rig Frame, Mining Machine System & Platform, Barebone Motherboard for BTC/ETH/ZEC with 4 Cooling Fans, Mining Frame Case with SSD, RAM (Without PSU/GPU)

$659.99

Category:

Description

Price: $659.99
(as of Dec 01,2021 15:17:58 UTC – Details)


Product Description

MLLIQUEA MLLIQUEA

MLLIQUEA 8 GPU Mining Rig Machine System for BTC/ETH/ZEC/ETC

Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency.

MLLIQUEAMLLIQUEA

MLLIQUEAMLLIQUEA

MLLIQUEAMLLIQUEA

Large Port Gap Between GPUs

The GPU interface spacing is about 70mm, and the space is larger than other miners. Therefore, it will have better heat dissipation performance, which can ensure low power consumption, less heat generation, energy-saving, and safe use.

8 * GPU Ports

The motherboard of the mining machine barebones comes with 8 GPU interfaces, and 8 GPUs can be installed at the same time. With 8 GPUs working at the same time, the performance of the BTC/ETH/ETC mining machine system will be greatly improved. The actual work done for you is lasting and rewarding.

Easy to Connect

We are equipped with 8 x 6+2 PIN cable to connect to the motherboard and GPU (GPU is not included) at the same time, or you can DIY the connection method you want.

MLLIQUEAMLLIQUEA

MLLIQUEAMLLIQUEA

MLLIQUEAMLLIQUEA

CPU Radiating Plate

Equipped with a CPU heat sink with a good heat dissipation effect to prevent the motherboard from overheating during work, the actual work done for you is lasting and rewarding.

4 Cooling Fans

The pre-installed large-flow cooling fan of the mining machine chassis can accelerate air convection, strengthen heat dissipation, ensure good heat dissipation, and extend the life of the graphics card.

External Power Interface

The power supply for our mining machine frame is 1U, 2U or 4U. If your power supply’s size is not adapted, we also have an external power interface, you can connect the power cord to the interface from the outside.

MLLIQUEAMLLIQUEA

How to connect

-Picture 1: We separately equip you with eight 6+2PIN adapter cables to connect the motherboard and GPU.

-Picture 2: The power cord is plugged into the port on the side of the motherboard, and the power switch is turned on to power on. (PSU can be external)

 MLLIQUEA  MLLIQUEA

MLLIQUEA Mining Rig Frame

Notice:

This product does’t include power supply and graphics card.Please purchase the power supply separately for the system to work normally.Our motherboard only supports a single power supply. If you want to use multiple power supplies, you need to short-circuit it and use a professional mining machine power supply.You can choose the 1U, 2U or 4U power supply for our mining rig frame.The size of the 2U built-in power supply is 240mm (9.5inch) x 110mm (4.3inch) x 63mm (2.5inch). If your power supply’s size is not adapted, we also have an external power interface.

What Will You Get

1x 8 GPU Mining chassis

1 x Switch line

1 x 128GB mSATA SSD

8 x 6+2 PIN cable

15 x Screws

Specifications:

Motherboard

8 cards in-line PCI-E spacing 70MM

CPU

Inter G630/640/650

RAM

DDR3 4GB

Hard Disk

128G SSD MSATA

Power Cord

6+2PIN

Cooling Fan

4 fans 12038 4500RPM

USB

Rear*2

Network Port

Gigabit RJ45 interface RTL8111E

Display Interface

HDMI

AC

AV180V-AV260V

Working Temperature

-10℃~50℃

Working Humidity

5%RH-95%RH non-condensing

OS

Linux/windows

MLLIQUEAMLLIQUEA

8 GPU Ports – The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding.(Graphics cards longer than 320mm cannot be used.)
Upgrade Material – Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining.
Eth Mining Rig – Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you’ll need to install the system yourself.
Safe and Silent – It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency.
Note – The GPU miner machine system doesn’t come with GPU or PSU. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it. Please feel free to contact us if you have any questions.

Reviews

There are no reviews yet.

Be the first to review “MLLIQUEA 8 GPU Mining Rig Frame, Mining Machine System & Platform, Barebone Motherboard for BTC/ETH/ZEC with 4 Cooling Fans, Mining Frame Case with SSD, RAM (Without PSU/GPU)”

Your email address will not be published. Required fields are marked *